Testumgebung M32

Achtung: Diese Webseite funktioniert ohne JavaScript möglicherweise nicht korrekt. Bitte aktivieren Sie JavaScript in Ihrem Browser.

Building envelope

Filter

TEGUVAP® LS 80

Airtightness brake

Translucent, flame-retardant, flexible and easy-to-apply airtight film made of polyethylene. One side is equipped with an anti-slip coating.

Application
Thanks to the anti-slip coating of TEGUVAPR LS 80, the airtight film provides a secure hold in pitched roofs. It can be used for single and double-ventilated roof constructions.

Gluing
The overlaps of TEGUVAPR LS 80 can be bonded with the following products: TEGUTAPER 6000 (30202.004), TEGUTAPE R 6100 (30208.010).

1 Version
TEGUVAP® 739

Airtightness brake

Flame-retardant vapor retarder made of polyethylene, very flexible and easy to install. The semi-transparent design makes installation easier, especially when backfilling with insulating materia

Gluing
The overlaps of TEGUVAPR 739 can be bonded with the following products: TEGUTAPER 1100 YELLOW INDOOR (30210.020), TEGUTAPER 1000 GREEN OUTDOOR (30210.001), TEGUTAPER 6000 (30202.004), TEGUTAPER 6100 (30208.010).

from

CHF

158.40

/ 99 m2

from

CHF

158.40

/ 99 m2

2 Versions
TEGUVAP® 2500

Airtightness barrier

Rot-proof, flexible and weldable airtight barrier. Thanks to the large delivery width of 5 meters, TEGUVAPR 2500 Can be installed very quickly and cost-effectively on the flat roof.

Gluing
The overlaps of TEGUVAPR 2500 can be bonded with the following products: TEGUTAPER 1000 GREEN OUTDOOR (30210.001), TEGUTAPER 6000 (30202.004), TEGUTAPER 6100 (30208.010).

from

CHF

80.00

/ 62.5 m2

from

CHF

80.00

/ 62.5 m2

2 Versions
Rubber shot mats

Tegum building protection mat

The Tegum building protection mat offers protection against mechanical damage for high-quality waterproofing and insulation in accordance with DIN 18195 Part 10.

Application
The building protection mat can be used on flat and ground roofs, terraces and parking decks as well as underground garages. The Tegum building protection mat also provides optimum protection in civil engineering, bridge and traffic construction, gardening and landscaping.

Processing
Loosely laid or bonded to waterproofing. After laying, cover immediately with gravel, sand or humus soil, stone slabs, etc. The rolls are overlapped by the width of a hand. The overlaps can be glued with a suitable adhesive if required.

This covering is not suitable as footfall sound insulation, it serves purely as protection against mechanical damage.

from

CHF

122.65

/ 7.5 m2

from

CHF

122.65

/ 7.5 m2

4 Versions
Ventilation tapes

PVC ventilation tape

Flexible ventilation strip made of weather and frost-resistant PVC. Improved air circulation in the ventilation spaces thanks to the optimum hole geometry. Fastened every 25 to 30 cm.

Application
Suitable as a bird and insect screen on the end faces of counter battens, rafters and wall constructions.

from

CHF

81.00

/ 60 m

from

CHF

81.00

/ 60 m

9 Versions
Roll ridge

TEGUROOF®

High-quality, water-repellent roll ridge made of a sewn polyester fabric and corrugated aluminum for venting the ridge and hip with inserted butyl adhesive tape. Adapts exactly to any roof tile shape and is very quick and easy to install.

from

CHF

58.75

/ 5 m

from

CHF

58.75

/ 5 m

3 Versions
Pressure rollers

from

CHF

106.85

/ 1 pcs

from

CHF

106.85

/ 1 pcs

3 Versions
Ventilation profiles

from

CHF

3.20

/ 1 m

from

CHF

3.20

/ 1 m

4 Versions
Nail seal punched parts

TEGUROOF®

Single-sided self-adhesive nail seals.

Application
Inserted between the roofing membrane and the counter battens They reliably and permanently protect nail points and thus protect against penetration Wetness.

1 Version
Endless nail seals

1 Version
TEGUVAP® ALU-PE

Grid-reinforced vapor barrier made of LDPE-aluminum-LDPE. Thanks to the grid reinforcement, TEGUVAP® ALU-PE has a high mechanical strength. The aluminum provides a high vapour barrier value. The special width of 2m allows cost-saving installation and at the same time minimizes butt joints. TEGUVAP® ALU-PE is also alkali-resistant thanks to the LDPE coating on both sides of the aluminum foil. Thanks to this coating, the vapor barrier can also be easily welded with a hot air dryer.

1 Version
TEGUTOP® 1000

TEGUTOP® 1000 is a diffusion-open covering and sub-roof membrane made of a highly tear-resistant polypropylene nonwoven composite. This structure gives TEGUTOP® 1000 a high elongation at break and excellent water vapor diffusion properties. Despite its high diffusion capacity, TEGUTOP® 1000 is waterproof and provides reliable protection against rain, moisture, dust and drifting snow.

from

CHF

138.75

/ 75 m2

from

CHF

138.75

/ 75 m2

2 Versions

Brauchen Sie Hilfe??

Wir sind für Sie da und beraten Sie gerne. Rufen Sie uns an, schicken Sie uns eine Nachricht oder lassen Sie sich von uns zurückrufen.

Öffnungszeiten

Montag bis Freitag

7.00 - 12.00 / 13.00 - 17.15 Uhr

+41 (0)52 723 63 30

Request a callback

Send an email