TEGUFIL® PE Backfill profile TEGUFIL® PE is a backfill profile made of polyethylene foam. The Smooth surface prevents water absorption and sticking of the sealant on the profile, which ensures optimal two-sided adhesion favored. The relatively solid material leads to a convex Limitation of the joint depth and thus an increased adhesive surface the sealant on the sides of the joint. On the one hand, this means that full mobility and elasticity of the sealant is guaranteed, on the other hand, the material acts as an excellent insulating material. TEGUFIL® PE is laid using a blunt Spatula or piece of wood with the marking of the required ones Joint depth. Application TEGUFIL® PE is particularly suitable as a backfill profile for precisely cut Outdoor joints, floor joints and for joints, that come into contact with water.
TEGUFIL® PUR Backfill profile TEGUFIL® PUR consists of open-cell polyurethane foam. The round profile is soft and cuddly. Application TEGUFIL® PUR is particularly used as a backfill and insulation material with slightly irregularly cut joints in the interior used. Note Joints in which TEGUFIL® PUR was used should, if possible, be come into little contact with water, around the sides of the joint to be exposed to prolonged water exposure. Putty infiltration!
TEGUCLEAN hand wipes The abrasive hand cleaning cloths remove oil, grease, adhesives and silicone. The rough side can be used to loosen stubborn stains, which are then finally removed with the smooth side. The cleaning agent is particularly kind to the skin, cares for the hands and has been dermatologically tested. The fleece is tear-resistant and does not fluff.
Fountain foam illbruck Fountain foam This 1-component polyurethane foam is particularly suitable for sealing and joining concrete manhole rings and folded joints. It has excellent adhesion to a wide range of standard building substrates, e.g. concrete, masonry, stone, plaster, wood, fiber cement, metal and numerous plastics (polystyrene, PUR rigid foam, polyester, rigid PVC). Product advantages - Manhole ring bonding with excellent adhesion and seal - Leak test by MFPA Leipzig in accordance with DIN 4034 Part 2 - Good dimensional stability - Resistant to rotting, heat and water - Fast curing
Fire-resistant PU foam Nullifire Fire Rated Nullifire FF197 is a modified, 1-component, fire resistant polyurethane foam polyurethane foam. Area of application FF197 is designed for filling and sealing linear joints with fire protection fire protection. Product advantages - Proof of fire resistance in joints between mineral components - Quick & easy processing - High yield - Low consumption per running meter of joint - Flexible area of application - Can also be used manually thanks to 2-in-1 valve
Facade sealant illbruck Proflex Seal This 1-component elastic hybrid polymer-based sealant is used for the elastic sealing of structural joints in accordance with DIN 18540 and for connection joints between concrete, masonry, metal, wood and various plastics in accordance with ISO 11600. An odorless splitting product is released during the curing process. In addition to its very good resistance to weathering, ageing and light, SP520 also adheres securely to standard building materials without primer (see primer table) and is insensitive to moisture. Once the sealant has fully cured, temperatures of up to +90°C are possible. Very well suited for MINERGIE-Eco, 1st priority according to Eco-BKP. Product advantages - Low viscosity even at low temperatures - Short thread tension - Solvent, isocyanate and silicone-free - Permanently elastic - Component testing according to ift guideline MO-01/1 - RAL-certified and externally monitored
Instant Adhesive Plus illbruck High Tack Pro This elastic, stable, 1-component, hybrid polymer-based adhesive is particularly suitable for stress-equalizing bonding of a wide range of materials in the construction, trade and industrial sectors that require immediate, high initial adhesion. The adhesive can be used indoors and outdoors. It is ideal for horizontal and vertical bonding of materials without additional fixing, e.g. wood and wood-based materials, many metals, glass, mineral building materials, sandwich elements, plastics, etc. Product advantages - Easy to extrude - Extremely fast initial adhesion - Fast through-hardening - Permanently elastic - Solvent-, isocyanate- and silicone-free - High mechanical strength - Certified free of residential toxins according to EC1 PLUS
High temperature sealant illbruck High Temperature Seal FA890 can be used to seal gaps and joints between heating elements and walls. The material can be used both inside and outside a building, especially when high temperature resistance is required. Product advantages - High temperature resistance - Good extrusion and processing properties - Adheres well to glass and non-corrosive, uncoated metal frames - Contains no isocyanates or flame retardants - Complies with REACh, RoHS and WEEE regulations
Fire-resistant silicone sealant Nullifire Fire Resistant FS703 is a 1-component, elastic, fire-resistant, alkoxy-based silicone sealant with neutral cross-linking. FS703 offers 240 minutes fire resistance for interior and exterior construction joints. Area of application Component joints on walls and ceilings, joints between frames and reveals, joints in connecting areas of different materials (movement absorption capacity ±7.5 %). Advantages - Proof of fire resistance in joints between mineral building components - Flexible area of application, even for joints up to 50 mm wide - Excellent airtight joint seal - Standard installation depth in a ratio of 2:1 (joint width to depth) - Can be used both indoors and outdoors
Fire-resistant acrylic sealant Nullifire Intumesc. Acryl Seal Nullifire FS702 offers a fire-resistant and flexible joint seal. The product is suitable for various installation situations and has excellent sound insulation and airtightness values. Area of application Suitable for fire-resistant joint sealing with a movement absorption capacity of up to ±7.5 %. Nullifire FS702 can be used to fill linear openings between different building materials and to seal smoke control doors. Advantages - VKF Technical Information No. 30300 - Flexible area of application, joints up to 50 mm wide - Variable color design possible, as it can be painted over - Excellent acoustic and airtight joint seal
Window and connection joint sealant illbruck Flex Seal 20 illbruck SP510 is suitable according to DIN EN ISO 11600 for the permanently elastic and low-emission sealing of connection joints of windows and doors in interior and exterior areas. The wide adhesion spectrum allows easy processing without primer on many substrates. The viscosity is adjusted so that the sealant is easy to apply even through narrow nozzles. Particularly suitable for sealing components with low strength, such as aerated concrete. Product advantages - Good adhesion with improved formulation - Interior vapor barrier - Low odor and free of solvents, isocyanates and silicone - UV and weather resistant - EC1 Plus certified